Placing the Boundary Flags
The boundary flags are visual reminders for your pet of where the warning zone is located. Boundary flags are an important part of training your pet to recognize the boundary area.
- Remove the receiver collar from your pet and ensure it is on.
- Attach the test light tool that was included with your original system to the collar probes.
- Walk out into your yard.
- Hold the collar and test light at the level of your pet's height.
- Walk towards the warning zone until the receiver collar beeps and the test light tool illuminates.
- Place a boundary flag in the ground at the location where you hear the beep and see the light of the test light tool flash.
- Walk back into the pet area until the beeping stops.
- Repeat this process around your yard, place flags every 10 feet until the containment yard is fully marked with flags.
Note: the higher the level of correction of the receiver collar that brighter the light with flash. If you cannot see the light flash, increase the level of correction of the collar. Make sure that you reset the correction level to the typically level for your pet before you place the collar back on your pet.
Do you still have questions? We are here to help you! Click here to contact our Customer Care Center via phone or email.