Remove the battery from the receiver collar. Discharge all power by holding the correction level button down until the LED is no longer illuminated.
At the transmitter, move the boundary switch from the low to the high position.
Slowly adjust the boundary control dial up to #8, down to #1 and then back to the #4 position.
Standing within 5-10 feet of the transmitter, reinsert the battery into the receiver collar.
Take the receiver collar, use the test light tool or listening to the collar for the beeping. As you walk away from the transmitter and approach the boundary, the test light illuminates or you'll hear the collar beep at the boundary. If this happens, the system is working.
Once you are confident that the system is working, slowly reset the transmitter controls to the original setting
If the problem persists, please click here for contact information to reach our Customer Care Center.